All elements
Roofing

Steel sheet roof (corrugated)

Steel sheet roof (corrugated)

In short : The corrugated steel sheet roof is the most common roofing in Africa: light, quick to install and economical, it rests on a timber or steel frame and sheds rainwater quickly.

Typical dimensions & rules
  • •Sheet thickness: 0.30-0.50 mm (0.40 mm minimum recommended), galvanized or pre-painted
  • •Minimum slope: 10-15% (about 6-9°); 20 cm end lap and one-corrugation side lap
  • •Purlin spacing: 0.8-1.2 m depending on sheet thickness
  • •Fixing: self-drilling screws with sealing washers, about 6-8 per m²
  • •Under-roof insulation (mineral wool, reflective film) to limit heat and rain noise
Common mistakes to avoid
  • ✗Sheet too thin (0.25 mm): fast corrosion, wind distortion
  • ✗Slope too low: leaks at laps
  • ✗Screws without washers or over-tightened: leaks
  • ✗No insulation: heat and rain noise

Local prices by country

Frequently asked questions

How many sheets for a 100 m² roof?

Count the real area (including slope, about 105-115 m² for 100 m² on plan) plus 10% for laps and offcuts.

Which sheet thickness?

0.40 mm is a good compromise for a house; 0.50 mm for windy areas or public roofs.

What is the role of: steel sheet roof (corrugated)?

The corrugated steel sheet roof is the most common roofing in Africa: light, quick to install and economical, it rests on a timber or steel frame and sheds rainwater quickly.

What are typical dimensions and rules for steel sheet roof (corrugated)?

Sheet thickness: 0.30-0.50 mm (0.40 mm minimum recommended), galvanized or pre-painted. Minimum slope: 10-15% (about 6-9°); 20 cm end lap and one-corrugation side lap. Purlin spacing: 0.8-1.2 m depending on sheet thickness. Fixing: self-drilling screws with sealing washers, about 6-8 per m². Under-roof insulation (mineral wool, reflective film) to limit heat and rain noise.

What mistakes should I avoid with steel sheet roof (corrugated)?

Sheet too thin (0.25 mm): fast corrosion, wind distortion. Slope too low: leaks at laps. Screws without washers or over-tightened: leaks. No insulation: heat and rain noise.

Get it checked by a pro

Unsure about your site? DiasporaBuild's verified engineers and contractors review your drawings and execution.

Find a verified expert →