Steel sheet roof (corrugated)

Steel sheet roof (corrugated) in Uganda

Preview

Track material prices

Price ranges and 3-month trend, by country.

Material prices · 3-month trendIllustrative
Cement 50 kg+4.2 %
Rebar HA 12-1.8 %
Sand (m³)+2.4 %
Block 15+0.6 %
Min–max ranges by country

In short: The corrugated steel sheet roof is the most common roofing in Africa: light, quick to install and economical, it rests on a timber or steel frame and sheds rainwater quickly.

Steel sheet roof (corrugated)

Local material prices in Uganda

Median of published surveys, in local currency with euro equivalent. “Indicative” prices come from the DiasporaBuild reference table and are updated as field surveys are added.

MaterialCityMedianRange≈ EUR
Roofing sheetfeuilleKampala41 500 UGX41 500 UGX – 41 500 UGX9.26 €

Price alert by email

Get an email if the median price of “Roofing sheet · Uganda” moves by 5% or more (at most one email a week).

Typical dimensions & rules
  • • Sheet thickness: 0.30-0.50 mm (0.40 mm minimum recommended), galvanized or pre-painted
  • • Minimum slope: 10-15% (about 6-9°); 20 cm end lap and one-corrugation side lap
  • • Purlin spacing: 0.8-1.2 m depending on sheet thickness
  • • Fixing: self-drilling screws with sealing washers, about 6-8 per m²
  • • Under-roof insulation (mineral wool, reflective film) to limit heat and rain noise
Common mistakes
  • ✗ Sheet too thin (0.25 mm): fast corrosion, wind distortion
  • ✗ Slope too low: leaks at laps
  • ✗ Screws without washers or over-tightened: leaks
  • ✗ No insulation: heat and rain noise

Frequently asked questions

How much do materials for steel sheet roof (corrugated) cost in Uganda?

Roofing sheet (Kampala) : 41 500 UGX / feuille (41 500 UGX – 41 500 UGX).

How many sheets for a 100 m² roof?

Count the real area (including slope, about 105-115 m² for 100 m² on plan) plus 10% for laps and offcuts.

Which sheet thickness?

0.40 mm is a good compromise for a house; 0.50 mm for windy areas or public roofs.

What mistakes should I avoid with steel sheet roof (corrugated) in Uganda?

Sheet too thin (0.25 mm): fast corrosion, wind distortion. Slope too low: leaks at laps. Screws without washers or over-tightened: leaks. No insulation: heat and rain noise.