Cement render

Cement render in Nigeria

Preview

Track material prices

Price ranges and 3-month trend, by country.

Material prices · 3-month trendIllustrative
Cement 50 kg+4.2 %
Rebar HA 12-1.8 %
Sand (m³)+2.4 %
Block 15+0.6 %
Min–max ranges by country

In short: Cement render protects block or brick walls from rain and moisture and prepares the paint finish. It is applied in three coats to limit cracking.

Cement render

Local material prices in Nigeria

Median of published surveys, in local currency with euro equivalent. “Indicative” prices come from the DiasporaBuild reference table and are updated as field surveys are added.

MaterialCityMedianRange≈ EUR
Cementsac 50 kgLagos13 263 NGN12 525 NGN – 14 000 NGN8.84 €
Cementsac 50 kgAbuja12 800 NGN12 200 NGN – 13 400 NGN8.53 €
Sandm³IndicativeLagos19 000 NGN19 000 NGN – 19 000 NGN12.79 €

Price alert by email

Get an email if the median price of “Cement · Nigeria” moves by 5% or more (at most one email a week).

Typical dimensions & rules
  • • Scratch coat: fluid mortar 1:2 to 1:3, thrown for key
  • • Body coat: mortar 1:3 to 1:4, thickness 10-15 mm
  • • Finish coat: fine mortar 1:4 to 1:5, 5 mm, floated or scraped
  • • Wet 2-3 times a day for 3 days (especially in hot weather)
  • • Mesh reinforcement at concrete/masonry junctions to prevent cracks
Common mistakes
  • ✗ Single thick coat: cracks and delamination
  • ✗ Dusty or undamped substrate before application
  • ✗ Unwashed sea sand (salt): efflorescence and corrosion
  • ✗ Application in full sun without wetting

Frequently asked questions

How much do materials for cement render cost in Nigeria?

Cement (Lagos) : 13 263 NGN / sac 50 kg (12 525 NGN – 14 000 NGN). Cement (Abuja) : 12 800 NGN / sac 50 kg (12 200 NGN – 13 400 NGN). Sand (Lagos) : 19 000 NGN / m³ (19 000 NGN – 19 000 NGN) — indicative.

How much cement to render 100 m²?

For about 20 mm total thickness, plan 2 m³ of mortar, i.e. roughly 12-15 bags of 50 kg cement.

What mistakes should I avoid with cement render in Nigeria?

Single thick coat: cracks and delamination. Dusty or undamped substrate before application. Unwashed sea sand (salt): efflorescence and corrosion. Application in full sun without wetting.